Verify xpanel functionality crestron how to#
Verify xpanel functionality crestron drivers#

If discrete power is supported, press the power on button and verify the device immediately powers on, and verify the driver indicates the device is warming up for the duration defined in the driver.

Reconnect the cable and verify the driver indicates it has reconnected to the device within 10 seconds.

These devices should always report connected. The exception is IP devices that disconnect on power off.

Disconnect the physical Ethernet, serial, or HDMI cable from the device and verify the driver reports the device is disconnected within 15 seconds.

Except for IR drivers, verify the driver can be reconnected using the reconnect function in the test program.

Except for IR drivers, verify that the driver can be disconnected using the disconnect function in the test program.

Then, verify the driver connects to the device successfully.

Verify xpanel functionality crestron how to#

If the driver requires any additional input to connect to or control the device, such as a passcode, verify there is a user attribute stating how to get the information and the input can be sent to the driver through the test program.Verify those messages show in the test program and following them allows the driver to work with the device.

If the driver requires additional settings on the device to connect to it, they should be listed in the user attributes as messages.If the driver requires authentication, send an invalid user name and password to the module, and verify it does not connect.If the driver requires authentication, send a valid user name and password to the module, and verify it connects successfully.The version of the driver should be present.The supported models should list any other models compatible with the driver.The base model should be the model of device used to test the driver.The SDK version built with device manufacturer should be accurate with no misspellings.Verify the basic information is correct:.

Verify xpanel functionality crestron drivers#

Load the driver into the SIMPL test program using the XPanel test program and verify that the XPanel indicates that the driver is loaded and connected (IR drivers will not show connected).